is there anyone on cazic-thule that are some good smithers? if so i got some money and im a barb so if you could please make me some ill pay you good!!! just write back with your name and ill send ya a tell thanks alot
tenin
Blacksmithing
Blacksmiths have the ability to forge their own armor and weapons both for personal use and for sale to others.
What are the best strategies for developing and using the blacksmithing skill? What items are the most and least useful ones to forge? Which classes are best suited to take up this trade? Can you make a profit off of blacksmithing, and if so how? Which cities are the best places to practice your trade?
Post your strategies on how to best use and develop the blacksmithing skill, and read, rate and comment on those posted by others.
Anonymous
is there anyone on cazic-thule that are some good smithers? if so i got some money and im a barb so if you could please make me some ill pay you good!!! just write back with your name and ill send ya a tell thanks alot tenin
Anonymous
Ok, Where can I buy Oak Shafts, and do they go by another name? also, Please donot say "in Kelethin" cause i've gone all over that mockery of existance, and i would much prefer an exact name and location..:) Thanks
Surulaia.
Surulaia.
Anonymous
Ok I know you told me not to tell you that it is possible to buy oak shafts in Kelethin,well you are right. You need to go to Felwithe. The vendor's name is Opal Leganyn and his location is inside Emerald Armour, in North Felewithe. Hope this can help you.
- Mamasya(Druid) :Luclin Server
- Mamasya(Druid) :Luclin Server
Anonymous
heya! 47 Dark elf mage and smith of 172 skill here , ive made some fine plate before but id really like to know how to dye it, i know i need dye laquer and acid, but i cant find where to get it. I dont know how to make the dye either, which trade skill it requires, or when its trivial. If someone knows where to get dye, or what to make it with please TELL ME!!!
Thanks
Rith Awakener
47 magician extrodinaire
Torvonnolous
Thanks
Rith Awakener
47 magician extrodinaire
Torvonnolous
Anonymous
To make the dyes you need the assistance of either a shaman or rogue. Shaman with a skill of 85 (i think) in alchemy, or a rogue (dont know skill level) in poision making. They can make the dyes for you. It would help if you collected the materials required so all they had to do would be to hit the combine button. The materials varies as to what colors you desire, none the less they are all a PIA to get. Good luck to you.
Argaha
36 Shaman
M Marr
Argaha
36 Shaman
M Marr
Anonymous
does anyone know the trivials for me.....I have a 12 barb. warr. but havnt put any points in blacksmithing!Im not sure what i should be making.thanks
Anonymous
Well my friend, I can offer you some advice but it is not alot. First I am not from any where near where Barbarians are so I can not tell you where to shop at. How ever, make metal bit(1 piece of small ore plus 1 piece of small ore plus one water flask). Do this until it trivialises(not sure what level) then all I can say is sharpen rusty weapons, the bad thing here is that the easiest sharpening stones for you to get in Antonica is in HighHold Pass( Or so I have heard). Once you get it up to a fair amout(let's say around 40ish make lanterns until 68 then onto skewers until 115, then pots up to 122 and then onto pot up to 168. I hope this can help you. I would also like to add at this point that smithing does not get capped like other skills(say 1hs according to your level) You can raise it higher then what your current cap is, as to how high I am not sure but best of luck to you and good smithing.
Mamasya(Druid) Luclin server
Mamasya(Druid) Luclin server
Pots don't trivial at 168, they trivial at 135, so you'll need to do banded.
Also, I would do skewers right after metal bits. It'll be tough at first, but think of all the time you save not having to runa around looking for rusty weapons.
Also, I would do skewers right after metal bits. It'll be tough at first, but think of all the time you save not having to runa around looking for rusty weapons.
Anonymous
Just curious. As a DE cleric, will I be able to imbeu (cant seem to spell it) materials to make cultural armor? I was told clerics do it, and I have been told it is an enchanter ability/ spell... does anyone know?
Thanks
Thanks
To Imbue, you will need a Cleric (Lvl 29+) to cast a spell on the appropriate gem for your race (Saphire for Darkelves). To enchant you will need an enchanter (lvl 49+ I believe) to enchant the adamantite.
Some races can make "Enchanted Imbued Armor", and guess what...then you'll need both ;P
Some races can make "Enchanted Imbued Armor", and guess what...then you'll need both ;P
I have noticed that many of the easier things to make that i cn find require ore or metal bits, which requires ore. So my question is: Where is the closest source of ore from Kelethin, and how much do small bricks cost?
Anonymous
you can buy small bricks of ore in the mine in kaladim. they cost 6 to 7 gold each.
I don't know if it is the closest or not, but you can buy Ore in FreePort.
A small brick of ore will cost 6sp. or 1.2pp per stack
A small brick of ore will cost 6sp. or 1.2pp per stack
Anonymous
I've been tryin to find where i can get medium quality ore, I've been told it drops off goblins, but is there any way to make or vendors perhaps.
Medium Quality Ore can be bought from Ukla in Rathe Mountains (ogre/troll camp at 1730,1300), Graham Embersmith in HighHold Keep (near bank) and Godbin Strumharp in Steamfont Mountains (windmill near 51,-611).
High Quality Ore on the other hand drops off various goblins around Norrath - in SolA, HHK, Permafrost, Runnyeye - and cannot be bought from vendors.
High Quality Ore on the other hand drops off various goblins around Norrath - in SolA, HHK, Permafrost, Runnyeye - and cannot be bought from vendors.
Medium Quality Ore is sold by the bank in HH
Anonymous
Question that I have is what is the quickest and least costly way to get to level 200. I have roughly 3000pp in the bank and was looking at making ogre culture armor.
Gruglly (discordians)
Lvl 16 shadow knight
black smithing 139
Gruglly (discordians)
Lvl 16 shadow knight
black smithing 139
I would do banded gauntlets to 168, banded cloaks to 175, fine steel collars to 182, fine steel visors to 195 and then fine steel bracers to 205.
I might add, that if you only want to make the cultural armor for yourself, you would perhaps be better off just buying it (if any ogre smiths on your server are cultural-able that is). Easier and most likely cheaper - at least if you gather the components yourself.
I might add, that if you only want to make the cultural armor for yourself, you would perhaps be better off just buying it (if any ogre smiths on your server are cultural-able that is). Easier and most likely cheaper - at least if you gather the components yourself.
Anonymous
Ok i am a halfling cleric and i was wondering what stats and what i need for the halfling armor stuff.
THANKS YOU
THANKS YOU
Do to the cost of smithing, I made a twink to learn smithing. I decided I would supply him with all the ore needed to rase his skill to 115. I also got the basic smithing book for my smith. As a general rule the less something cost to make the lower the skill needed to make said item.
This being the case, and since they are needed in most low skill items I started out making metal bits. Once I was no longer gaining skill I made toolboxes and arrow heads. I was able to sell some of the toolboxes for a nice profit to other players. For the most part I rased my skill to lvl 41 on arrowheads. I had better sucess rate with these than toolboxes, also you can make many more before having to go sell. To skill lvl 51 made toolboxes. Now I'm making skewers.
My twink has been able to buy everything needed except for the ore. At present my smith is lvl 6.
I hunted in the new zone from lvl 23 to 24 with my shaman. I made over 100pp and obtained a conbantion of split bamboo and wiker set of armor, as well as some low lvl weapons for my twink. The shaman comes in handy for running up to HH to buy ore and such.
I have enjoyed the smithing skill but I wonder why it cost so much to make the weapons. They range from bronze to FS like stats. I think if they made the weapons cheeper to make 1pp to 3pp or so, it would be a great help to the newbie smiths as we as to the nonsmiths. I see lots of people running around at my lvl and higher still using rusty weapons.
The best time to sell any product is when you are in a zone in which most of the people there want the item you are selling. This bing the case I need to sell most of my banded in pre lvl 20 zones. However it would be hard to buy the ore needed to become a master smith before you are too old to leave most of the lower zones where poeple are buying banded.
This being the case, and since they are needed in most low skill items I started out making metal bits. Once I was no longer gaining skill I made toolboxes and arrow heads. I was able to sell some of the toolboxes for a nice profit to other players. For the most part I rased my skill to lvl 41 on arrowheads. I had better sucess rate with these than toolboxes, also you can make many more before having to go sell. To skill lvl 51 made toolboxes. Now I'm making skewers.
My twink has been able to buy everything needed except for the ore. At present my smith is lvl 6.
I hunted in the new zone from lvl 23 to 24 with my shaman. I made over 100pp and obtained a conbantion of split bamboo and wiker set of armor, as well as some low lvl weapons for my twink. The shaman comes in handy for running up to HH to buy ore and such.
I have enjoyed the smithing skill but I wonder why it cost so much to make the weapons. They range from bronze to FS like stats. I think if they made the weapons cheeper to make 1pp to 3pp or so, it would be a great help to the newbie smiths as we as to the nonsmiths. I see lots of people running around at my lvl and higher still using rusty weapons.
The best time to sell any product is when you are in a zone in which most of the people there want the item you are selling. This bing the case I need to sell most of my banded in pre lvl 20 zones. However it would be hard to buy the ore needed to become a master smith before you are too old to leave most of the lower zones where poeple are buying banded.
Anonymous
I want to start smithing. I have no idea where to get my stuff, and what to put in the forge. Can you help me?
Vinadul
13th Season SK
Zeb Server
Vinadul
13th Season SK
Zeb Server
Anonymous
please help! where can i find sharpening stones int eh Halas - qeynos area? i must have checked every black smith scource and some. but no shapening stone to be found.
Tsabrak
Paladin of Karana
Tsabrak
Paladin of Karana
Erudin or Highpass are the 2 closest vendors for them.
Anonymous
You can find a good sharpening stone source in erudin..thats where i get mine and im a barbie as well..watch out though, you'll arive with little or no faction adjustment and the prices will be outrageous intially..try hunting kobolds to help a little or just take it and eath the cost differance.
Anonymous
Where in Erudin? I looked all over and couldn't find any.
Ozadar
Ozadar
where do u tell what ur skill level is. i have sharpened several knives and saw nothing about any level
Anonymous
Yeah this is annoying especially to a new smith. I'd keep a written log..when your skill goes up write it down. That way you know..otherwise im just as lost as you are as to finding actually skill levels only skill descriptions ie average, below average etc..
how do u make a simple file, every forge i go to says not at this forge try another forge
Anonymous
files are made by metal bits, molds and water. if you are using these and still cant create them, make sure you are not at a racial forge ie in halas there is a barbarian forge right infront of the weapon shop, its name slips my mind at this time, if you go around back you can use the generic forge. also somehing to look out for is make sure your at a forge. ive tried to smith on several occasions at ovens and kilns..lol. hope i helped..
1 post
Where does one find a file mold though? I've looked Halas, Quynos areas, and Erudin, and no luck.
how do u make a simple file, every forge i go to says not at this forge try another forge
Anonymous
How can I work blacksmithing if I'm a troll. I tried it at the Grobb forge, and it told me, 'wrong kind of items.' I tried it at the Ogre forge, and it told me it was only for Ogres. Help!
Anonymous
Greetings I am a Druid of the 15'th season and I am lloking into becoming a smith. I feel this is the best trade skill I can chose because at lvl 29 us Druids get two spells used in smithing. Imbue Plains Pebble(Worshipers of Karana) and Imbue Emerald(Worshipers of Tunare),these imbued items can then be used for smithing armour. Can some one please tell me more about using this ability I would appreciate it. Also is there ANY way to enchant metals used in smithing, perhaps even going so far as using the jewelry metals for smithing armours. Well hope I can get some info back.
Mamasya(Wood Elf) Druid Lvl 15
Server: Luclin
Mamasya(Wood Elf) Druid Lvl 15
Server: Luclin
Anonymous
Well, a couple things. As a Wood Elf you worship Tunare, so you won't be able to use the Plains Pebble Spell, that is Karana Only. Also you can do cultural smithing w/ the imbued emeralds (you can use imbued pebbles too, you just won't be able to imbue them) however Wood Elf Cultural Smithing is use to create weapons and the Mithril Weapons you can make are rather nice.
Greetings friend.
Shaklor Soulraizer, Master Blacksmith at your service. The spells of which you speak bring a blessing upon the stones in which it is cast. These stones are then used to bring said blessing to imbue magical armor. For smithing you must be able to use a cultural forge and thus for elves, you must be high elven.
It may be in your best interest, although this is a very arduous task, to take up tailoring. This is a skill that you can benefit truly from as your wood elven culturual is in fact tailoring.
Do not be discouraged by this news however, as norrath is always in need of fine smiths.
Shaklor Soulraizer
52nd Vicar of Tunare
Master Smith
Master Baker
Shaklor Soulraizer, Master Blacksmith at your service. The spells of which you speak bring a blessing upon the stones in which it is cast. These stones are then used to bring said blessing to imbue magical armor. For smithing you must be able to use a cultural forge and thus for elves, you must be high elven.
It may be in your best interest, although this is a very arduous task, to take up tailoring. This is a skill that you can benefit truly from as your wood elven culturual is in fact tailoring.
Do not be discouraged by this news however, as norrath is always in need of fine smiths.
Shaklor Soulraizer
52nd Vicar of Tunare
Master Smith
Master Baker
Anonymous
You may have gotten good marks in Smithing in College, but apparently you fell asleep in your Diversity credit classes. Wood elves have cultural smithing, and they also use Imbued Emeralds and Plains Pebbles. Wood Elves can make some very nice wis/agi weapons w/ dex or cha depending on deity used to Imbue
To see some of the weapons search this site for Mithril Fier'dal
To see some of the weapons search this site for Mithril Fier'dal
What is the easiest and cheapest way for you to get good at smithing?
Anonymous
i found there to be no such thing. smithing is expensive, in both money and materials, but if you must..locate an ore supply the small chunks will due for now. make metal bits till you cant increase the skill no more...then make about 50% more..make 2 or 3 files, you'll need only one but files are the next easiest item (imho), feild point arrow heads should be next, then studs for studded leather, if you aren't multitasking (like i am) you should be able to sell these to a tailor pc ( or use them yourself if your a multitasker)..the guides on this website are real good, i'd consult them before running off with what i said.
Anonymous
Is there a good excel spreadsheet to keep track of the skill level of characters?
Scholar
33 posts
I am not aware of one...however, you pretty much have to have a skill over 100 to forge anything that is of real EQ value in smithing (like banded mail). After your skill reaches 101 (master) your skill value is displayed in your character's skill section. It will look like this:
Smithing
-212-
Master
Hope this helps.
Beetem the Ogre
Smithing
-212-
Master
Hope this helps.
Beetem the Ogre
Anonymous
hi, i just starting black smithing and my skill is at 24, can someone tell me how to boost it up and what i can make and how i make it, it would be really helpfull.
Maranta of Cabilis
Maranta of Cabilis
Scholar
33 posts
I recommend going out and killing creatures with rusty weapons. If you are a late blooming smith (not a newbie) just go buy rusty weapons. Then with sharpening stones (5cp/ea) put one in the forge with a rusty weapon and combine. The result will be a tarnished weapon.
This will raise your skill to about 27. Doing 2Handed Swords will raise it up to 31.
Afterwards, start making metal bits (two small pieces of ore, stackable) and a flask of water in the forge. Use these metal bits with a scaler mold and yet another flask of water to make fish scalers. Scalers trivialize at 41.
Good luck
Beetem the Ogre
This will raise your skill to about 27. Doing 2Handed Swords will raise it up to 31.
Afterwards, start making metal bits (two small pieces of ore, stackable) and a flask of water in the forge. Use these metal bits with a scaler mold and yet another flask of water to make fish scalers. Scalers trivialize at 41.
Good luck
Beetem the Ogre
Anonymous
hi, i just starting black smithing and my skill is at 24, can someone tell me how to boost it up and what i can make and how i make it, it would be really helpfull.
Maranta of Cabilis
Maranta of Cabilis
Anonymous
i am a lvl 29 skill, what should i be making?
Scholar
33 posts
Fish Scalers...
Metal bits + scaler mold + flask of water
Trivial at 41
PS: Metal bits are made with two small pieces of ore (stackable) and a flask of water. They will be your friend for a long time. I recommend many of the smithing guides on this site.
PPS: Although small pieces of ore are stackable, do not stack them in the forge.
Metal bits + scaler mold + flask of water
Trivial at 41
PS: Metal bits are made with two small pieces of ore (stackable) and a flask of water. They will be your friend for a long time. I recommend many of the smithing guides on this site.
PPS: Although small pieces of ore are stackable, do not stack them in the forge.
Anonymous
hers a question and it is a very SERIOUS one sooonce blacksmithiiiing is a very PRICEY buisiness and i need money can any one tell me what these items are that u make and what thier for lol just curious if i can sell them or should i save them for late smithing need ?
BONE GRANITE POWDER?
BOAT BEACON?
AND FINALLY WHERE DO I FIND THE MOLD FOR SHESTAR'S SCALED COIF?
BONE GRANITE POWDER?
BOAT BEACON?
AND FINALLY WHERE DO I FIND THE MOLD FOR SHESTAR'S SCALED COIF?
Don't know about the first two but for the coif you have to take three scales off of Scaled wolves in FoB and 5gp and give them to Trooper Shester, near the zone to FoB in Cab. When you give him that, you then take the "Unfinished coif" and three more scales and combine them in a forge and voila, 4ac .8wt with a cool look for iksars :)
Chingwon Furyfist
46th Monk of the 4th Rung
Chingwon Furyfist
46th Monk of the 4th Rung
Anonymous
what will my skill have to be to forge the unfinished coif and 3 scales?
kinderak
lvl 23 warrior
vallon zek
kinderak
lvl 23 warrior
vallon zek
Anonymous
I'm in need of a very highly skilled high elf smith on vallon zek, if you are one and if you wanna make a great deal, send please a tell to arnalh freesinger or to caredil, i have all needed component, thanks
Caredil
shadowknight of the 31 season
Arnalh Freesinger
Bard 40
on Vallon Zek
Caredil
shadowknight of the 31 season
Arnalh Freesinger
Bard 40
on Vallon Zek
Free account required to post
You must log in or create an account to post messages.© 2024 Fanbyte LLC