Item GlossaryEverQuest icon

Ak`Anon Strike Force V Black Badge  
 

MAGIC ITEM LORE ITEM NO TRADE AUGMENTATION
Augmentation type: 7 8
Slot: HEAD SHOULDERS CHEST
AC: 5
CHA: +5 AGI: 0+2 HP: +135 MANA: +135 ENDUR: +135
SV CORRUPTION: +5
Recommended level of 80. Required level of 75.
WT: 0.0 Size: TINY
Class: ALL
Race: ALL

Item Information:
You must use the solvent Class XV Augmentation Distiller or greater to remove this augment safely.
Item Lore:A secret engineering badge only awarded as the highest honor
Item Type:Augmentation
Appearance:Cloth
Tint:
 
Color (RGB):0, 0, 0
Stackable:No
Lucy Entry By:Torzul
Item Updated By:SwiftyMUSE
Source:Live
IC Last Updated:2020-11-05 05:36:39
Page Updated:Thu Oct 9th, 2008
Secrets of Faydwer Item


Rarity: Common
Level to Attain: 80

[Comments ]

This item is the result of a quest.


Zone(s) Found In:
Screenshot

Uploaded July 20th, 2014 by Merf
Send a correction
Post Comment
more!
# Jan 19 2008 at 6:09 PM Rating: Decent
before u can get him to spawn there are steps to do:

Calibration Device Screws, Calibration Device Schematics, Calibration Device and Clockwork Driveshaft are for the task Spy Reports. The Calibration Device is a ground spawn in Steam Factory at loc +44 +132 +88. The other 3 items very rarely drop from trash mobs.

[Sat Jan 19 20:47:05 2008] You say, 'Hail, a fan mechanic'
[Sat Jan 19 20:47:05 2008] Your task 'Spy Reports' has been updated.
[Sat Jan 19 20:47:05 2008] a fan mechanic barely turns to acknowledge you, his hair rustling slightly in the breeze from the fan behind him, 'Did someone [send] you to speak with me?'

[Sat Jan 19 20:51:54 2008] a fan mechanic regards you indifferently -- looks like he would wipe the floor with you!
[Sat Jan 19 20:51:56 2008] You say, 'send'
[Sat Jan 19 20:51:56 2008] a fan mechanic says 'Well, who sent you?'


[Sat Jan 19 20:52:34 2008] You say, 'spymaster gurtrude'
[Sat Jan 19 20:52:35 2008] a fan mechanic nods with relief, 'It's good that you've contacted me, my name is Cogly, I have been unable to report back to Gurtrude due to the increased security here... All thanks to the new head engineer, Gearwhir... He is causing all sorts of problems for us, and needs to be [eliminated] at all costs.'
[Sat Jan 19 20:52:57 2008] You say, 'eliminated'
[Sat Jan 19 20:52:58 2008] a fan mechanic lowers his voice slightly, 'Gearwhir is highly intelligent; he is also extremely paranoid and is very careful to avoid being exposed to any potential threat... I've been here gathering information for quite some time and I've worked out a [plan] to lure him out into a location we control, and ambush him...'

[Sat Jan 19 20:53:13 2008] You say, 'plan'
[Sat Jan 19 20:53:13 2008] a fan mechanic ***** his head to one side, 'I've noticed that Gearwhir seems to have an amazing ability to monitor and maintain almost all parts of this facility... Any time the slightest problem arises, he seems to be on site almost immediately to fix the problem... We will need to gather a few [parts] first, but I believe we can exploit this fact to ambush and neutralize him.'
[Sat Jan 19 20:53:31 2008] You say, 'parts'
[Sat Jan 19 20:53:32 2008] a fan mechanic says 'One of our other agents has managed to surreptitiously disable and secure a steamwork in one of the main manufacturing rooms... If we can gather the parts to create a [warped driveshaft], we can install it into the steamwork and reactivate it. With any luck, it will cause enough of a commotion to draw out Gearwhir, and enable us to strike before they have a chance to react.''

[Sat Jan 19 20:54:25 2008] You say, 'warped driveshaf'
[Sat Jan 19 20:54:25 2008] a fan mechanic says 'To create a warped driveshaft we need to liberate a regular Clockwork Driveshaft from one of the steamworks in the factory... Unfortunately they are a bit delicate, so you may have to try a few times to find one that isn't damaged. We will also need a calibration device; you can probably find a Calibration Device in one of the storage rooms. Some of the engineers here sometimes carry Calibration Device Screws and Calibration Device Schematics, we will need those items as well in order to set and use the calibration device to warp the Clockwork Driveshaft... Once we're done, we can [insert] the Warped Clockwork Driveshaft into the disabled clockwork in the manufacturing room.''
[Sat Jan 19 20:54:56 2008] You say, 'insert'
[Sat Jan 19 20:54:57 2008] a fan mechanic sighs softly, 'Unfortunately I will not be able to leave my post to assist you... Once you insert the Warped Clockwork Driveshaft, the steamwork should begin to malfunction and draw out Gearwhir... He's not to be underestimated, so be sure you have backup before you engage him.... If you are successful, be sure to search him carefully for any information, if you find anything of importance, deliver it to Gurtrude at once.'
Spy Reports
# Jan 03 2008 at 3:08 PM Rating: Decent
*
94 posts
Spy Reports

Spymaster Gurtrude
quests from her need to be done to get enough faction for her to give you this quest

1. Make Contact with an undercover agent in the Zepplid
2. Assist Agent Starm with observing Siege Inspector Huttle
3. Report back to Gurtrude
4. Make Contact with undercover agent in South East computer core (steam)
5. Assist Agent Cogly and Kill Head Engineer Gearwhir
6. ???
7. ???
8. ???
9. ???
10. ???
and so on

Any one have a clue where Head Engineer Gearwhir is or how to make him spawn?

Edited, Jan 4th 2008 1:49pm by Foerster
task aug
# Dec 25 2007 at 5:35 AM Rating: Good
Scholar
48 posts
aug is from a task can send a message for info or in game tell.
____________________________
Darkdoc Daastarley
90 Ranger - AB
Ancient Dominion
http://eq.magelo.com/profile/1327451
---------------------
Darkdoc Daastardly
73 Ranger- The Tribunal
Finally
# Nov 16 2007 at 11:17 PM Rating: Decent
Great Job on this item!

Would like to know where to loot/quest it please.
Post Comment

Free account required to post

You must log in or create an account to post messages.